At present, the types of protective masks on the market include bandage type, inner ear type, outer ear type, etc. the production of these masks requires the use of mask machine. There are many steps in the whole process of using the automatic disposable mask machine to produce masks.

First of all, we need to use raw materials. The raw materials of disposable masks include PP non-woven fabric, melt blown fabric, nose bar, ear band and other materials. At the same time, we also need mask production equipment. Take a fully automatic disposable mask machine, we need to use mask maker, mask ear band spot welder and mask packaging machine.

After the materials and equipment are complete, disposable masks can be produced. The specific production steps are as follows:

1. The inner mask needs to be shaped and hot pressed;

2. The materials used for forming the outer mask include non-woven fabric, melt blown fabric, activated carbon non-woven fabric, etc;

3. Press the inner and outer masks together;

4. After trimming and pressing the mask, the redundant edges need to be cut off;

5. Fit the nose line with aluminum strip, rubber strip and other materials;

6. Ear band welding: weld the left and right ear bands to both ends of the mask, and generally weld one;

7. Mask disinfection and packaging.

The above steps are to use the automatic disposable mask machine to produce masks. It can be seen that there are still many steps. We should pay attention to regular maintenance and maintenance of the mask machine when we use it at ordinary times.